A transformer that decreases voltage from primary to secondary (more primary winding turns than secondary winding turns) is called a step down transformer. These transformers are also called Step down Insulation or Isolation Transformers.
This is a step down insulation transformer, as evidenced by the high turn count of the primary winding and the low turn count of the secondary. As a step down unit, this isolation transformer converts high-voltage, low-current power into low-voltage, high-current power. The larger-gauge wire used in the secondary winding of this step down insulation transformer is necessary due to the increase in current. The primary winding of this isolation transformer, which doesn't have to conduct as much current, may be made of smaller-gauge wire.
WWe can supply these types of step down transformers in various capacities and as per the customer specific requirements.Rating Available: 1 KVA to 1000 KVA
We manufacture and export various types of Step Up Isolation Transformers which reduce the effects of power Line problems like noise, spikes, surges, transients and neutral, to a minimum.
A Step Up Transformer is the one that increases the voltage from primary to secondary ie more secondary winding turns than primary winding turns.
This is a isolation transformer, as evidenced by the high turn count of the Secondary winding and the low turn count of the primary windings.
We can supply these step up transformers in various capacities and as per the customer specific requirements.Rating Available:1 KVA to 1000 KVA
The single phase Power Isolating or isolator transformer is one that contains two windings: Primary and Secondary winding, that are separated from each other but wound on the same Iron core. The secondary that governs the output is, in this manner, separated from the input. The Input side of the isolating transformer and output side of the isolator transformer are totally independent of each other except for the magnetic linkage between the two.
Owing to inductive loads, capacitive loads, SMPS loads, electronic ballasts and with PWM Switching systems, the present AC Power lines are superimposed with dangerous spikes, Surges, transients, sags and RFI noise and harmonics. As a result failure rates of electronic equipment are on the rise. we use 1 phase transformer to overcome these problems
Usually the failures are not seen right away. Repeated stress from normal electrical transients weaken components and lead to shortening of component life. Line noises like spikes, surges, transients and so on definitely cause stress on semi conductor components. And Machine Systems experience catastrophic program and software failures, extensive damage to PLC’s and storage media, leading to heavy losses of production, data and man-hours.
We manufacture and export various types of single phase Isolating and Isolator Transformer , which reduce the effects of the above mentioned power Line problems like noise, spikes, surges, transients and neutral, to a minimum.Rating Available: 1 KVA to 1000 KVA