Sine Wave Inverter

Feature  List Of 3 Phase Sine Wave Inverter

These inverters broadly cover the following applications.
(i)    Off Line Inverter With Contactor Change Over
(ii)    Lift /Heavy Duty Motor Inverters
(iii)    On Line Inverter With External Charger

FEATURES:
1.    Single phase & three phase
2.    No load shut down and load restart
3.    Single phase prevention
4.    Phase imbalance protection
5.    Phase sequence error protection
6.    Over load protection & restart
7.    Short circuit protection & restart
8.    Variable freq. drive  (Lift/Pumps etc)
9.    Output voltage : 220V ±1%
10.     Load Regulation better than 5%
11.    Lo & stage CCCV: Better than 5%
12.     4 Stage Mains charger : 2A to 20 Amp
13.    Solar Charger  10Amp to 40 Amp
14.    Low voltage cut at : 160 VAC
15.    High voltage cut at : 260 VAC
16.    Battery low cut  & restart
17.    Galvanic Isolation (Transformer models)
18.    4 Line LCD display
19.    Buzzer alarms
20.    Transformerless  Inverters 
21.    Efficiency better than 85%
22.    THD less than 3%

Rating Available : 2 KVA to 15 KVA

Other Information
•Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)

DSP SINE WAVE INVERTER
We Are Supplier & Exporter Of DSP based sine wave inverter / Home UPS. Our DSP based sine wave inverter / Home UPS employ cutting edge Digital signal processing technology (DSPT) and IGBTs to provide most efficient power conversion besides attractive user friendly features.
We offer wide range of DSP sine wave Home UPS / Inverter from 100VA to 7500VA in single phase operation. They are highly reliable and are appliances friendly due to high quality of sine wave.

Product details:
•    Efficiency > 80 %
•    Wide Charging Range
•    Inverter and UPS operation
•    Protected for short circuit, over voltage, over current
•    Charging current adjustable

Rating Available : 100 VA to 7500 VA

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

1 Phase DSP Sine Wave Inverter

FEATURES LIST OF DSP SINE WAVE HOME UPS
100VA/200VA/300VA/400VA/600VA/800VA/1000VA/1500VA/2000VA/2500VA/3000VA/4000VA
/5000VA/6KVA/7.5KVA

1- D.S.P. based; less components, small size, more efficiency.
2- Peak load handling capacity is three times of rated capacity; can smoothly start heavy motors.
3- Soft start features; protects appliances at startup.
4- Supply pure sine wave power; with low THD.Protects sensitive office equipments.
5- Low maintenance cost.
6- Software controlled Auto self testing.
7- Over load and D.C. low protection.
8- Computer Compatible UPS operation.
9- Intelligent Auto sense; continuously monitors health of system.
10- AC Input low and high voltage cut off protections in both, inverter and U.P.S. modes.
INV (90-290)V,UPS (180-260)V
11- Constant voltage/Constant current pulse charging with wide Input range (140-280)V.
(Charging current 1-15Ampr)
12- Silent operation of fans, tube light or appliances.
13- Software controlled Auto reset feature for over load, short ckt and low battery
14- Fully protected against short circuit of AC mains with output.
15- Phase to phase short circuit protection.
16- Low no load current for prolonged battery operation under standby.
17- Crystal controlled operation.
18- Built in cooling fan.
19- Fold back current limiting protection for short ckt surge load & over load.
20- Thermal shutdown. (Incase of FAN failure).
21- Can Charge Deep Discharged Battery(6.2V)
22- Reverse battery protection (optional).
23- Solar charging facility (optional).
24- Generator compatible(45HZ to 55HZ)
25- High efficiency; better than 85%.
26- Output Voltage Regulation: Better than 5%
27- Isolated battery operation
28- Protected against 440V AC Mains
29- Available in Both LED/LCD Display

Rating Available : 100 VA to 7500 VA

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ICD New delhi
• Delivery Time: 1 - 2 weeks

We Are Supplier Exporter Of DSP based sine wave inverter / Home Ups. Our DSP based sine wave inverter / Home Ups employ cutting edge Digital signal processing technology (DSPT) and IGBTs to provide most efficient power conversion besides attractive user friendly features.

Product details:

• Efficiency > 80 %

• Wide Charging Range

• Inverter and UPS operation

• Protected for short circuit, over voltage, over current

• Charging current adjustable

FEATURES:

• D.S.P. based; less components, small size, more efficiency.
• Peak load handling capacity is three times of rated capacity; can smoothly start heavy motors.
• Soft start features; protects appliances at startup.
• Supply pure sine wave power; with low THD. Protects sensitive office equipment.
• Low maintenance cost.
• Software controlled Auto self testing.
• Over load and D.C. low protection.
• Computer Compatible UPS operation.
• Intelligent Auto sense; continuously monitors health of system.
• AC Input low and high voltage cut off protections in both, inverter and U.P.S. modes. INV (90-290)V,UPS (180-260)V
• Constant voltage/Constant current pulse charging with wide Input range (140-280)V. (Charging current 1-15 Amp)
• Silent operation of fans, tube light or appliances.
• Software controlled Auto reset feature for over load, short ckt and low battery
• Fully protected against short circuit of AC mains with output.
• Phase to phase short circuit protection.
• Low no load current for prolonged battery operation under standby.
• Crystal controlled operation.
• Built in cooling fan.
• Fold back current limiting protection for short ckt surge load over load.
• Thermal shutdown. (In case of FAN failure).
• Can Charge Deep Discharged Battery(6.2V)
• 3 PHASE DSP SINE WAVE INVERTER / UPS

 

Applications:

• Off Line Inverter With Contactor Change Over
• Lift /Heavy Duty Motor Inverters
• On Line Inverter With External Charger

 

FEATURES:

• Single phase three phase
• No load shut down and load restart
• Single phase prevention
• Phase imbalance protection
• Phase sequence error protection
• Over load protection restart
• Short circuit protection restart
• Variable freq. drive (Lift/Pumps etc)
• Output voltage : 220V ±1%
• Load Regulation better than 5%
• Lo stage CCCV: Better than 5%

 

We Are Supplier & Exporter Of DSP based sine wave inverter / Home Ups. Our DSP based sine wave inverter / Home Ups employ cutting edge Digital signal processing technology (DSPT) and IGBTs to provide most efficient power conversion besides attractive user friendly features.

Product details:

• Efficiency > 80 %

• Wide Charging Range

• Inverter and UPS operation

• Protected for short circuit, over voltage, over current

• Charging current adjustable

FEATURES:

• D.S.P. based; less components, small size, more efficiency.
• Peak load handling capacity is three times of rated capacity; can smoothly start heavy motors.
• Soft start features; protects appliances at startup.
• Supply pure sine wave power; with low THD. Protects sensitive office equipment.
• Low maintenance cost.
• Software controlled Auto self testing.
• Over load and D.C. low protection.
• Computer Compatible UPS operation.
• Intelligent Auto sense; continuously monitors health of system.
• AC Input low and high voltage cut off protections in both, inverter and U.P.S. modes. INV (90-290)V,UPS (180-260)V
• Constant voltage/Constant current pulse charging with wide Input range (140-280)V. (Charging current 1-15 Amp)
• Silent operation of fans, tube light or appliances.
• Software controlled Auto reset feature for over load, short ckt and low battery
• Fully protected against short circuit of AC mains with output.
• Phase to phase short circuit protection.
• Low no load current for prolonged battery operation under standby.
• Crystal controlled operation.
• Built in cooling fan.
• Fold back current limiting protection for short ckt surge load & over load.
• Thermal shutdown. (In case of FAN failure).
• Can Charge Deep Discharged Battery(6.2V)

 

 

Applications:

• Off Line Inverter With Contactor Change Over
• Lift /Heavy Duty Motor Inverters
• On Line Inverter With External Charger

 

FEATURES:

• Single phase & three phase
• No load shut down and load restart
• Single phase prevention
• Phase imbalance protection
• Phase sequence error protection
• Over load protection & restart
• Short circuit protection & restart
• Variable freq. drive (Lift/Pumps etc)
• Output voltage : 220V ±1%
• Load Regulation better than 5%
• Lo & stage CCCV: Better than 5%

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)